The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
●
Enable Notification when Open Networks Are Available: From Wi-Fi settings, tap Menu >
Advanced > Network notification.
The setting is available when Wi-Fi is turned on.
Tap Network notification to turn the option on or off.
●
Scanning always available: From Wi-Fi settings, tap Menu > Advanced > Scanning always
available
The setting is available when Wi-Fi is turned on.
Tap Scanning always available to turn the option on or off.
●
Set Timing for Pausing a Connection: From Wi-Fi settings, tap Menu > Advanced > Keep
Wi-Fi on during sleep mode and then select a setting.
●
Install certificates: From Wi-Fi settings, tap Menu > Advanced > Install certificates and then
select a setting.
●
Wi-Fi Direct: From Wi-Fi settings, tap Menu > Advanced > Wi-Fi Direct to select a setting.
●
WPS Push Button: From Wi-Fi settings, tap Menu > Advanced > WPS Push Button to select
a setting.
●
WPS Pin Entry: From Wi-Fi settings, tap Menu > Advanced > WPS Pin Entry to select a
setting.
●
Check MAC Address: From Wi-Fi settings, tap Menu > Advanced.
MAC Address appears below "MAC Address."
●
Check IP Address: From Wi-Fi settings, tap Menu > Advanced.
IP Address appears below "IP Address."
Settings
110