Olympus SP-590UZ Instruction Manual page 64

ng OLYMPUS Master 2
System requirements and
installation of OLYMPUS
Master 2
Install the OLYMPUS Master 2 software
referring to the included installation guide.
Connecting the camera to a
computer
1
Make sure the camera is turned off.
• The monitor is off.
• The lens is retracted.
2
Connect the camera to a computer.
• The camera automatically turns on.
Windows
After the computer detects the camera, a
message indicating the completion of the
setting appears. Confirm the message and
click "OK". The camera is recognized as a
removable disk.
Macintosh
When iPhoto starts, exit iPhoto and start
OLYMPUS Master 2.
ft)
While the camera is connected to the
computer, shooting functions are disabled.
(]) Connecting the camera to a computer via a
USB hub may cause unstable operation.
(/) When [MTPj is set for the submenu that
appears by pressing
E)
after selecting [PC]
in step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
Multi-connector
SET.~
Starting OLYMPUS Master 2
1
Double-click the OLYMPUS Master 2
icon.
Windows
it
appears on the desk top.
Macintosh
·11
appears in the OLYMPUS Master 2 folder.
• Browse window appears after starting the
software.
o
When you start OLYMPUS Master 2 for the
first time after installation, "Default Settings"
and "Registration" screen appear. Follow the
instructions on the screen.
Locate the position of the USB port by
referring to your computer instructions
manual.
3
Use
0000
to select [PCl, and press
the
@
button.
• The computer automatically detects the camera as
a new device on the first connection.
64 EN