Carrycot Set Up - icklebubba Stomp Travel System User Manual

Step 1: Preparing the Carrycot
Recline Lever
a. The carrycot fabric should already be attached to the carrycot/seat unit frame.
PLEASE NOTE: The position of the carrycot may need to be adjusted to make
it level. This can be done by firmly pressing on the grey lever which can be
found at the top end of the frame.
Step 2: Bumper Bar Installation
a. Line up the holes on each side
before pushing firmly into place.

Carrycot Set Up

b. To remove, press the centre button
(A) inwards whilst pulling the bumper
bar upwards.
A
08