icklebubba Stomp Travel System User Manual page 10

Step 3: Canopy Installation
A
a. Take the longer strip from part A
and thread it through the front
section of the canopy fabric (B).
Repeat the same process with the
shorter strip from part A by threading
it through the rear part of the canopy
fabric.
c. Insert the shorter strip from part
(A) into the rear holes and the larger
strip into the front holes of the
canopy connectors. Fasten popper of
canopy onto canopy connector.
09
Carrycot Set Up
B
b. Make sure the canopy connectors
are facing inwards.
b. The longer strip shall be above
while the shorter strip is on the lower
position. Zip the canopy onto the
carrycot fabric and clip the connector
onto the frame.
Longer
Shorter