Download
Share
Print this page
  1. Manuals
  2. Brands
  3. scope Manuals
  4. Conference System
  5. DL4ACLUSA
  6. Installation & user manual

scope DL4ACLUSA Installation & User Manual

Digilink mk2 programmable uhf radio paging system
Hide thumbs

Advertisement

Quick Links

Download this manual
Digilink MK2
Digilink MK2
Digilink MK2
Digilink MK2
Digilink MK2
Programmable UHF Radio Paging System
Models DL4ACLUSA, DL8ACLUSA
Installation & User Manual
Scope Communications UK Ltd, Quantum House, Totnes, Devon TQ9 5AL Tel: +44 1803 860700
Fax: +44 1803
863716 Email: sales@scope-uk.com Web www.scope-uk.com
Digilink Uhf
Digilink Uhf
Digilink Uhf
Digilink Uhf
Digilink Uhf
DIGLUSAC3

Advertisement

loading

Related Manuals for scope DL4ACLUSA

Summary of Contents for scope DL4ACLUSA

  • Page 1 Models DL4ACLUSA, DL8ACLUSA Installation & User Manual Digilink Uhf Digilink Uhf Digilink Uhf Digilink Uhf Digilink Uhf Scope Communications UK Ltd, Quantum House, Totnes, Devon TQ9 5AL Tel: +44 1803 860700 Fax: +44 1803 863716 Email: sales@scope-uk.com Web www.scope-uk.com DIGLUSAC3...
  • Page 2 It is the purchasers’ responsibility to determine the suitability of this equipment and its derivatives for any given application, Scope cannot give specific advice in this manual, as each use will require independent evaluation. Scope has, wherever possible, employed extra safeguards or designed optional equipment to further monitor the system’s performance.
  • Page 3 All applications should be thoroughly assessed by the installer in conjunction with the customer so as to minimize risk. Scope has no control of the use and application of the frequencies issued by the FCC. Some equipment that is individually licensed may have a greater degree of protection than other equipment that is operated on a FCC License Assignment basis.
  • Page 4 There are no other expressed or implied warranties except as stated herein, and those excluded include those of merchantability and fitness for a particular purpose. In no event will Scope or any of its agents be liable for direct, indirect, special incidental or consequential damages resulting from any defect in the product, even if advised of the possibility of such damages.

  • Page 5: System Overview

    DigiLink US Mains Version System Overview The Scope DigiLink DL4ACUSA & DL8ACUSA are AC powered, programmable radio paging systems which can be used to transmit both text and numeric messages direct to pocket pagers carried by individuals or entire groups. The unit is supplied with either 4 or 8 inputs, which can be hardware configured to accept either dry contact (no voltage) or voltage (5-18V dc) triggers.
  • Page 6 Coaxial cable intended for TV, Satellite or CCTV installations is normally 75 OHM and therefore totally unsuitable for any transmitter installation manufactured by Scope. Also remember that the performance of the system will be affected by the type of material the unit is mounted on and its surroundings.
  • Page 7 DigiLink US Mains Version Installation The following procedure must be adhered to when installing the DigiLink paging system. Ensure you have taken into consideration all of the above information before selecting the location for your transmitter. If in doubt please consult your dealer. Remove the cover from the DigiLink transmitter unit by slackening the four Pozi head screws located at the top and bottom of the unit (see Diagram 1).
  • Page 8 DigiLink US Mains Version Installation WARNING ! Isolate mains supply before removing cover. The Transcoder PCB contains static sensitive components. Care should be taken to avoid contact wherever possible and anti-static precautions should be observed during installation. Diagram 1 Case Top Panel View Case Securing Screws (slacken to remove cover) Case Bottom Panel View...

  • Page 9: Section 2: System Operation

    Check that the red power LED on the base of the transcoder is lit. If not, isolate the power and check the mains plug fuse. The Scope mains input fuse on the integral power supply (250 mA, Anti-Surge) and the low voltage output fuse (2 A) may also be checked by a suitably qualified technician only.
  • Page 10 DigiLink US Mains Version Transcoder PCB: terminal connections DIGUSAC 02/00 Issue 3...
  • Page 11 DigiLink US Mains Version Other Antennas The range and performance of this equipment can be improved by the addition of more efficient antennas*. These can be installed either inside or outside the building and are connected to the transmitter with 50 OHM coaxial cable. Glass mount antenna (UHFGM): for installation on the inside of a suitable window.

  • Page 12: System Specification

    COM1: serial port for programming function only Data POCSAG Numeric or Alphanumeric format Footprint (mm): 328 (L) x 190 (W) x 75 (D) max excluding aerial Scope’s policy is one of continuous development and specifications are subject to change without prior notice DIGUSAC 02/00 Issue 3...

This manual is also suitable for:

Dl8aclusa