Time & Date - Zte AT&T Ogo Manual

Ogo Manual
Figure 31: Volume/Vibrate Pop-up
13.5. Time & Date
When your Ogo is powered on, it automatically synchronizes with the current time from the
AT&T Wireless network. If for some reason the network is not available, you can set the time
and date manually using the settings on the Time & Date tab.
Device Time
Network time
Set time
14295 Rev. 1.4 9/24/04
To turn vibration on or off, use the inner ring of the 8-Way Navigation key, and press left
or right.
Vibrate On Indicator
Option
Device Time shows the time as it is currently set on your Ogo.
Network Time shows the current time on the AT&T Wireless
network.
You can set the time manually or copy the network time. In most
cases you will want to copy the network time.
To set the time by copying the network time:
1. Select Set time and press Enter.
2. Select Copy network time and press Enter.
3. Select Done and press Enter.
To set the time manually:
1. Select Set time and press Enter.
2. Select Time.
3. Type numbers for the hour and minute.
4. Select the AM/PM pop-up and press Enter. Select either AM or
Vibrate
Note:
Only numbers can be typed in the hour and minute fields,
so using the ALT key to type numbers is not necessary.
PM and press Enter again.
After you set the time, you can toggle to select AM or PM.
Figure 32: Volume/Vibrate Pop-up
Mute Indicator
Description
Mute
61