Connecting The Charger; Charging The Battery; Powering On Your Ogo - Zte AT&T Ogo Manual

Ogo Manual
5.2.2.

Connecting the Charger

Connect the charger's power plug to the charging socket on the front of your Ogo (Figure 8).
Figure 8: Connect Charger
5.2.3.

Charging the Battery

Charge your Ogo for twelve consecutive hours. For more information on Ogo's battery
status, see Section 14.
Note:
5.3.

Powering On Your Ogo

Now that your Ogo is charging (or is fully charged), press the Power On/Off key:
When your device is powered on, you will see the screen shown in Figure 9. When your Ogo
connection is established, the Activation Wizard welcome screen appears.
Figure 9: Connection Status
14295 Rev. 1.4 9/24/04
You can begin the Activation Wizard while your Ogo is being charged.
18