Zte AT&T Ogo Manual page 59

Ogo Manual
SIM PIN required
Change PIN Code
Banner Settings
Reset Device
Confirm msg. delete
Prompt to add
contacts
Restore canceled
pop-ups
14295 Rev. 1.4 9/24/04
Option
For security purposes, enabling this option prompts you to enter a
PIN when the device is powered on. The initial SIM PIN for all SIMs
is 1111.
WARNING! If you forget your SIM PIN, you will have only three
opportunities to remember it. After three failed attempts, your device
will be locked and you must contact Ogo Customer Care to
reactivate your SIM.
Use this option to change your PIN code from the default setting
(1111). Be sure to keep a record of your new code in a safe place.
Use this setting to control whether banners appear when new
messages are received or IM contacts come online. See Section 7
for more information.
The Reset Device option allows you to remove all personal and
account information from your Ogo permanently (for example, if you
are preparing to give the device to someone else). This option
deletes all IM and e-mail accounts and all contact information, and
restores all default settings (for sounds, alerts, etc.).
To reset the device, from the pop-up select OK and press Enter.
The message displayed in the confirmation pop-up is as follows:
Resetting this device will return it to the original factory settings.
All e-mail and IM accounts will be deleted along with your
contacts. Resetting the device does not cancel your Ogo service,
please contact customer care at 866-293-4634 if you need to
make changes to your account.
NOTE: THE DEVICE WILL RESTART AFTER RESETTING.
To have Ogo ask you for confirmation when you delete a message,
select Confirm msg. delete, then press Enter to select or clear the
check box.
When you send an e-mail or SMS to an address that is not already in
your contacts list, you can have Ogo ask whether you want to add
that address to your contacts list before sending the message.
To be prompted to add new addresses to your contacts, select
Prompt to add contacts, then press Enter to select or clear the check
box.
To restore canceled pop-ups, select Restore canceled pop-ups, then
press Enter to select or clear the check box.
Description
59