Getting Started; Box Contents; Preparing Your Ogo; Installing Or Removing The Battery - Zte AT&T Ogo Manual

Table of Contents

Advertisement

Ogo Manual

5. Getting Started

5.1.

Box Contents

5.2.

Preparing Your Ogo

5.2.1.

Installing or Removing the Battery

To install the battery:
1. Turn your Ogo over and slide off the back cover.
2. Match the battery contacts with the contacts in the battery slot. Push the battery in,
Figure 7: Insert Battery
3. Push the other side down to slide the battery into place.
4. Replace the back cover.
5. Make sure that the battery has been properly installed before powering on your Ogo.
To remove the battery:
1. Power off your Ogo.
2. Turn your Ogo over and slide off the back cover.
3. Remove the battery, lifting it gently from the side opposite the contacts.
14295 Rev. 1.4 9/24/04
Ogo with SIM card installed
Battery and charger
Quick Start Guide
Terms of Use booklet (
contacts side down first (Figure 7).
What You Need to Know
)
17

Advertisement

Table of Contents
loading

Table of Contents