Ricoh feeder Troubleshooting Manual page 83

D
While pressing down the release lever, slide the side fences until they are
aligned the paper size you want to load.
E
Slide the end fence until it is aligned with the size of paper to you want to
load.
F
Square the paper and load it print side up.
Re-lock the side fences again.
G
Carefully slide the paper tray fully in.
H
Check the size on the display.
Note
❒ If there is space between the side fence and paper, bring the side fence
flush against the edge of the paper.
ANQ016S
ANQ017S
ANQ018S
Changing the Paper Size
5
77