Osd Warning Messages - Dell S2319H User Manual

OSD Warning Messages

When the Dynamic Contrast feature is enabled (in these preset modes: Game or
Movie), the manual brightness adjustment is disabled.
When the monitor does not support a particular resolution mode, the following
message is displayed:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled:
When the monitor enters the Power Save Mode, the following message appears:
If you press any button other than the power button, the following messages will
appear depending on the selected input:
28
| Operating Your Monitor
Dell 23 Monitor
To allow manual adjustment of brightness, the Dynamic Contrast will be
switched off.
Do you want to continue?
Yes
Dell 23 Monitor
The current input timing is not supported by the monitor display.
Please change your input timing to
other monitor listed timing as per the monitor specifications.
Monitor Specifications
Dell 23 Monitor
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
Dell 23 Monitor
Entering Power Save Mode.
No
S2319H
1920x1080, 60Hz
or any
for the Horizontal and Vertical
No
S2319H
S2319H