Ricoh Priport JP8000 Operating Instructions Manual page 120

Operation
D
Select the desired number to store
with the [← ← ← ← ][→ → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys.
1
E
Place the original on the exposure
glass as shown, then press the
{ { { { Start} } } } key.
Note
❒ If print images for an original
have already been stored in ma-
chine memory, check the stored
images and choose whether to
overwrite them or not. To over-
write the images, press the [Yes]
key. To keep the images, press
the [No] key.
❒ If you select overwrite, the doc-
ument stored in memory will be
erased unless it is write protect-
ed.
100
Non-standard size originals
A If you place non-standard size
original, this display will be
shown.
Press the [OK] key.
B Enter the vertical length with
the num ber key, an d then
press the { { { { #} } } } key.
C Enter the horizontal width
ZDCH110E
with the number key, and then
press the { { { { #} } } } key.
D Place your originals on the ex-
posure glass, and then press
the { { { { Start} } } } key.
TPES580E