Advertisement
Quick Links
tower unit 3 & 4 drawers
(400 & 600mm wide)
Assembly Instructions
I
Drawer sides (left)
CONTENTS:
A
1x Top panel
3 Drawer Unit
• 3x left
B
1x Side panel (left)
4 Drawer Unit
C
1x Side panel (right)
• 4x left
D
5x Shelves
J
Drawer sides (right)
(4x for 4 drawers)
3 Drawer Unit
• 3x
E
1x Plinth panel
4 Drawer Unit
F
Soft close drawer runners
• 4x
3 Drawer Unit
• 3x left, 3x right
K
Drawer bases
4 Drawer Unit
3 Drawer Unit
• 4x left, 4x right
• x3
4 Drawer Unit
G
Soft close clips
• x4
3 Drawer Unit
• 3x left, 3x right
L
Drawer fronts
4 Drawer Unit
3 Drawer Unit
• 4x left, 4x right
• x3
4 Drawer Unit
H
Drawer backs
• x4
3 Drawer Unit
• x3
M
Drawer handles
4 Drawer Unit
3 Drawer Unit
• x4
• x3
4 Drawer Unit
• x4
Page 1 of 6
Tower unit pack
28x
28x
2x
Cams
Dowels
Wall mounting
brackets
Drawer pack
12x
12x 12mm
12x 35mm
Euro Screws
Wood Screw
Wood Screws
(16x for
(16x for
(16x for
4 drawers)
4 drawers)
4 drawers)
6x 7mm
6x Handle
12x Cams
Wood Screws
Screws (8x for
(16x for
(8x for 4 drawers)
4 drawers)
4 drawers)
12x Push Dowels
(16x for 4 drawers)
www.spacepro.co.uk/instructions-2/
We recommend you use the Wall
Mounting Brackets provided to fix the
Tower Unit to a wall (where possible).
This will prevent the unit being pulled
over. Use suitable fixings.
Recommended:
• Tools:
Screwdriver & Hammer
• Two person build
SPR_INSTRUC_TU_DR_05.2016
V1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Spacepro 3 and 4 Drawer tower unit
Summary of Contents for Spacepro 3 and 4 Drawer tower unit
- Page 1 We recommend you use the Wall • Tools: Screwdriver & Hammer Mounting Brackets provided to fix the • Two person build Tower Unit to a wall (where possible). This will prevent the unit being pulled over. Use suitable fixings. Page 1 of 6 www.spacepro.co.uk/instructions-2/ SPR_INSTRUC_TU_DR_05.2016...
- Page 2 PLEASE NOTE THE 3 AND 4 DRAWER TOWER UNIT ARE THE SAME IN CONSTRUCTION. WE HAVE USED THE 3 DRAWER TOWER UNIT AS AN EXAMPLE. Note: B panel shown Lay panels (B &C) on a flat surface. Fit cams & dowels to both panels.
- Page 3 PLEASE NOTE THE 3 AND 4 DRAWER TOWER UNIT ARE THE SAME IN CONSTRUCTION. WE HAVE USED THE 3 DRAWER TOWER UNIT AS AN EXAMPLE. Ensure cams are facing inwards. Page 3 of 6 www.spacepro.co.uk/instructions-2/ SPR_INSTRUC_TU_DR_05.2016...
- Page 4 PLEASE NOTE THE 3 AND 4 DRAWER TOWER UNIT ARE THE SAME IN CONSTRUCTION. WE HAVE USED THE 3 DRAWER TOWER UNIT AS AN EXAMPLE. MAKING THE DRAWERS (Repeat on all drawer sides). (Repeat on all drawer fronts). Drawer side...
- Page 5 PLEASE NOTE THE 3 AND 4 DRAWER TOWER UNIT ARE THE SAME IN CONSTRUCTION. WE HAVE USED THE 3 DRAWER TOWER UNIT AS AN EXAMPLE. Screw soft close clip into place. (Repeat on all drawers). (Repeat on all drawers). Drawer shown from underneath. (Repeat on all drawers).
- Page 6 PLEASE NOTE THE 3 AND 4 DRAWER TOWER UNIT ARE THE SAME IN CONSTRUCTION. WE HAVE USED THE 3 DRAWER TOWER UNIT AS AN EXAMPLE. USE SUITABLE WALL FIXINGS WALL MOUNTING BRACKETS We recommend you use the Wall Mounting Brackets provided to fix the Tower Unit to a wall (where possible).
Need help?
Do you have a question about the 3 and 4 Drawer tower unit and is the answer not in the manual?
Questions and answers