Advertisement
Features Guide – Industrial printers
Paper handling
Input Paper Shelf (#4891, 4991) for 6500 - This shelf is designed to hold a box of paper or forms to be used with
a pedestal printer. It allows the input media to move easily with the machine. The shelf rests on the supports for
the pedestal printer.
Pullout Rear Paper Tray (#4540, 4541) for 6500 - An optional Pullout Paper Tray is now available for the cabinet
models. This feature provides a convenient tray that pulls out after printed output is stacked on the tray, instead of
on the floor. It is easier to remove the printed output from the tray than from the floor inside the printer. The tray is
similar to the one used with the Power Stacker feature.
Connectivity
Telnet 3270e/5250e - allows printing currently being performed with coax/twinax attached printers to be migrated
easily to network attached printers, without changing the existing application.
IPDS - allows print pages containing an unlimited mix of different types of data: high-quality text, images, vector
graphics, and bar codes.
Network Print Server and IPDS LAN Attachment Capability for 4247 - provide the capability for both LAN
support and twinax, coax, or serial support on the same IPS 4247 Printer.
IGP for 6500 - The Intelligent Graphics Processor (IGP) feature is a simple to use programming language for
creating sophisticated graphics, including bar codes, in printers equipped with the IGP board. IGP (also sometimes
called PGL) creates online forms and bar codes, and has a variety of alphanumeric text-generation capabilities.
Code V for 6500- The Code V feature is the QMS(TM)-compatible Intelligent Graphics Processor software
designated for the IPS 64XX family of impact line matrix printers. Code V emulates the QMS Code V Version II
programming language to produce online forms and bar code, and supports many alphanumeric text-generation
capabilities.
Black Back Forms Sensor (#4640, 4641) for 6500 - This feature provides a forms sensor that is capable of
detecting the end-of-forms (EOF) condition for black-backed forms. It may also be used to run forms with binder
holes in the body of the form. Because of the variation in the size of binder holes, testing is recommended to verify
that the sensor accommodates the size of the binder holes correctly.
RFID (#4950, 4951) for 6700 - includes a reader, antenna and associated components to enable programming
(encoding) and reading of RFID tags. RFID can be installed on the Model R40 or M40 in either the factory or in
the field.
Supports Class 1 Generation 2 Tag Types
On-Line Data Validator (#5610, #5611) for 6700 - an external device that attaches near the paper exit of the
printer. It scans the printed output for bar codes and monitors bar code quality. This feature is not applicable to
RFID. After a bar code passes the scan beam, the validator grades it and sends a report back to the printer. The
printer response is determined by the validator settings. A 1/2-inch distance between bar codes is required when
the validator is used. The validator feature only applies to picket fence (vertical) bar codes. The validator cannot
be used to verify ladder (horizontal) bar codes.
Media Cutter and Tray (#7340, #7360, #7380, #7341, #7361, #7381) for 6700 - automatically cuts media after
each label is printed or via a software command to cut media after a specified number of labels are printed.
Freephone 00800 7746 8464
infoprint@quantumtm.com
www.infoprint.com/uk
Advertisement
