Advertisement
ＲＣ－
ＲＣ－
ＲＣ－
ＲＣ－5 USB Temperature Data Logger Operation Instruction
I. Product overview:
This data logger is mainly used for temperature recording during storage and
transportation of foodstuff, medicine, chemicals and other products, especially widely
used in all links of warehousing, logistics and cold chain, such as refrigerated
containers, refrigerated trucks, refrigerated package, cold storage, laboratory, etc.
II.Specification:
Product size: 80mm (length) X 25mm (width) X 12 mm (height)
III.Technical parameters：
1. Temperature unit: ℃ or ℉ optional
2. Temperature measuring range： -30℃～+70℃
±0.5℃（-20℃～+40℃）;Others,
3. Accuracy：
4. Resolution：0.1℃；
5. Record capacity： 32000points(MAX)；
6. Record interval：10s～24hour adjustable；
7. Sensor: Internal NTC thermal resistor；
8. Communication interface：USB interface；
9. Power supply：inner wide temperature CR2032 battery or power supply via USB
interface;
10. Battery life: in normal temperature, if the record interval sets as 15 minutes, it
could be used half a year.
IV.Initial use:
1. Install RC-5 temperature data logger data management software.
2. Connect RC-5 with computer via USB, and install USB driver according to the
Installation Tips.
3. Open RC-5 temperature data logger data management software, click the
connection icon
from connection interface.
4. Click the parameters setting icon
setting, click "save" button to save all the parameters and exit from parameter setting
interface.
5. Exit from RC-5 temperature data logger data management software.
V.Data access
The recorded data information could be accessed from the temperature data logger.
And this process will not clear the historical memory or stop record process if it is in
the record status.
1. Connect the data logger with computer via USB interface, after successfully
connection, the icon
2. Open RC-5 temperature data logger data management software, click the
in the tool bar. After checking the connection information, exit
shown in the LCD of data logger will light.
+1℃；
in the tool bar
After finish the parameters
.
Advertisement
Related Manuals for Elitech RC-5
Summary of Contents for Elitech RC-5
- Page 1 IV.Initial use: 1. Install RC-5 temperature data logger data management software. 2. Connect RC-5 with computer via USB, and install USB driver according to the Installation Tips. 3. Open RC-5 temperature data logger data management software, click the connection icon in the tool bar.
- Page 2 3. Click the data uploading icon upload the data to the computer. Note: RC-5 parameters setting is operated through computer, for the details, please see the help file of RC-5 temperature data logger data management software. VI.Function description The data logger has two button: left button and right button. Left button is to start recording and switch between menu items, and right button is to stop recording and return to the menu items.
- Page 3 (Figure 2) Time display interface: In time display interface, it displays the hour and minute of the data logger. The time format is 24 hours. The display interface is as shown in Figure 3: ( ( ( ( Figure 3 Figure 3) ) ) ) Figure 3 Figure 3...
- Page 4 “ ”lights, it means recording stops. *After the data logger stops recording, it could not be started again by press the left button. It could only be started by setting the parameters in RC-5 data management software.
- Page 5 The record interval could be set in RC-5 data management software. After setting, it will save the data in the data logger according to the set record interval. In RC-5 data management software, when record interval is set, click the setting bar of record time length, then the software will automatically calculate the record time length.
- Page 6 Windows xp, WIN7, and mac. For the details, please refer to Help file of RC-5 data management software. 14. RC-5 parameter setting items in temperature data logger data management software： Note: It is the factory default setting in the brackets. The factory default state of data logger is without starting.