Orange Pi RK3399 User Manual page 20

Orange Pi User Manual
It could be operated by entering the corresponding instructions after the Rockusb> prompt. No

distinguish between capital and lowercase.
TD Command: used to test whether the device status is normal
DI Command: used for flashing separate partitions *.img ：
DI <-p|-b|-k|-s|-r|-m image> [parameter file]
The first parameter is used to specify the partition name that needs to be flashed.
The second parameter is used to specify the path of the flashed image
For example, there would be two method to flash kernel.img:
Rockusb>di -k ./kernel.img
Rockusb>di kernel ./kernel.img
UF Command: used for unity flashed image update.img
UF <Firmware>
The only parameter is used to specify the need to burn the firmware path.
For example, if my firmware path is:
RK3399_IMAGE/Image_Android6.0_20171228.img
Then the command should be:
www.orangepi.org
Shenzhen Xunlong Software Co., Ltd.
17 www.xunlong.tv