Using Method Introduction; 1．Hardware Requirement; 2．Software Requirement; 3．Power Supply Requirement - Orange Pi RK3399 User Manual

Orange Pi User Manual
II. Using Method Introduction
1．Hardware Requirement
Orange Pi RK3399 Development Board

A PC for compilation with following specs:

64bit CPU
Up to 16GB RAM
UP to 40GB spare disk space
Operation system should up to Ubuntu12.04, it would be better if it is Ubuntu16.04
You could refer to Google file for more details: https://source.android.com/source/building
2．Software Requirement
Orange Pi RK3399 SDK

Orange Pi RK3399 Firmware

Android-image-flash-tool

3．Power Supply Requirement
There are three methods for power supply:
DC （12V 2A）in for power

TypeC （5V 3A）in for power

Battery （Dual Battery 7.4V）in for power, connect the battery with our BAT interface

If insert TypeC and DC connector in the same time, the system would default charge by DC in. It
would not recommend to power by the battery, because different batteries need matching with
BQ25700 battery management IC according to their respective parameters.
www.orangepi.org
Shenzhen Xunlong Software Co., Ltd.
8 www.xunlong.tv