Edit: Preferences - 7th Sense Delta User Manual

DeltaMonitor
This feature is only for embedded systems to allow them to be put into 'Service Mode'. Service Mode
allows the user to make changes to the systems configuration or setup.

Edit: Preferences

DeltaMonitor > Edit > Preferences
The preferences menu provides controls for some of the configurable settings within DeltaMonitor.
Front Panel Com Port Selection
Allows the user to select the Com Port which Delta Monitor will attempt to communicate to the
LED front panel via. The drop down list is populated with all active comports, and Delta Monitor
will always default to Com Port 77.
Ignore Delta
Will force DeltaMonitor to ignore if DeltaServer application is running and the front panel will not
display status and control menu's but only show a fixed text of '7thSense'.
Show Alerts
Users can select this option to allow visual indications of incoming external controls. When
external controls are received the front panel will change to a different block colour dependent
on which control was received.
No alert:
Play:
Stop:
Rewind:
Forward:
Cue Alert:
External Control Alert:
Marker Alert:
Ma na gi ng Del ta Servers
Bl a ck
Green
Red
Cya n
Cya n
Ora nge
Purpl e
Li ght Cya n
© 2018 7thSens e Des i gn
34