Panasonic TGP500 Quick Start Manual page 2

Answering an Incoming Call
Putting a call on Hold
Switching between Calls
Hanging up a call
Call transfer
Conferencing two calls together
Voicemail Pickup
Select Network Settings
Select "Embedded Web"
Select On.
"Incoming Call" will display on the screen, and then
the CallerID of the caller will display. "Call" will flash
on the bottom of the screen.
­ Hit <Talk> to pick up call.
When you are on a call. a soft key will be
displayed on Screen that says "Hold". Press the
button above the Talk key to put the call on Hold.
the caller will immediately hear hold music, and
you can make or receive another call.
A soft key will appear that allows you to toggle
between calls on hold.
Press "Off"
While on a call, you can Press the Menu key and
scroll down and Select either "Transfer" (which is
attended transfer) or "Blind Transfer".
After hitting the key, enter the extension number.
You can at any time hit the soft key entitled "Trans"
to connect the 2 parties on the attended "Transfer".
Alternatively, you can enter #1<ext> or #2<ext> for
Blind or Attended Transfer respectively.
the Panasonic supports one (of a possible
two)ways of doing this:
1) If you have a current call, you can hit "Menu",
and scroll down and select "Conference", which will
place the call on Hold, and give you a dial tone to
dial another number. When that number is
connected, you will hit the "Conf" softkey to
connect all three parties together.
For picking up "My voicemail" (equivalent to dialing
801):
­ Select the Menu key
­ Scroll down to the bottom icon and select
­ Enter your Voicemail password at the prompt.
On the Deskphone unit, depress the flashing
Voicemail button.