Managing Contacts; Setting Ringtones - NGM Vanity Manual

Managing contacts

Adding new contacts
1. From Main menu, select Contacts.
2. Choose "+", then select the location where you want to
save the new contact (Phone or SIM1/SIM2).
3. Enter Name, Number and any other details (when saving
to Phone).
4. Confirm saving.
Adding new contacts from Call list
1. From Main menu, select Call Log.
2. Tap and hold on number you want to save (scrolling the
list including Missed calls, Dialed calls and Received calls).
3. Select Add new contact and choose to save a new
contact or add the number to an existing one.
4. Select the position where you want to save the contact
(SIM1/SIM2, Phone or a configured web account), and
confirm.

Setting ringtones

Select a ringtone
1. From Main menu, select Settings > Audio profiles.
2. Select General and then select Phone ringtone.
3. Select the desired ringtone from the list.
4. It is possible to add a customized ringtone. From Music
select an audio file, then open the context menu and
choose Use as ringtone. The audio file will now be added
to the ringtone list.
Note: it's possible to use *mid,*wav or *mp3 files. The same
procedure is of course applicable also to other profiles
contained in Audio profiles menu.
Screen lock and shortcuts
Locking your screen
From the Main menu, select Settings > Security > Set up screen
lock. Select the preferred method for locking your phone screen
(Pattern, PIN or Password) and confirm.
Calls redial from call log
1. From Main menu, select Call Log to access the Dialed /
Received / Missed Calls list for both SIM cards.
2. Tap onto the contact image (or the Android logo if no
image is associated with the contact).
3. If the contact has an associated SIM and if you have a
default SIM, the call will be sent by this SIM. Otherwise
you will have to choose the SIM.
How to enable or disable vibration
To quickly disable calls and message ringtones, it is enough to
hold the Volume "-" pressed from idle screen. Once the
minimum volume level is reached, the phone will automatically
switch to silent mode.