Yamaha YHT-S300 Service Manual page 23

Subwoofer integrated receiver sr-300, speakers ns-br300/ns-p705/ns-b380
Hide thumbs Also See for YHT-S300:
Table of Contents

Advertisement

Updating method using PC (RS232C)
● Required tools
Firmware downloader program ........ FlashSta.exe
Firmware ....................................... yas72_xxx.mot
RS232C cross cable "D-sub 9 pin female"
(Specifications)
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
RS232C conversion adaptor (Part No.: WR492800)
● Preparation and precautions
Download the firmware downloader program and
the latest firmware from the specified source to
the same folder of the PC.
Prepare the above specified RS232C cross cable.
While writing the fir mware, keep the other
application software on the PC closed.
It is also recommended to keep the software on
the task tray closed as well.
● Connection
*
Disconnect the power cable of this unit from the
AC outlet.
1. Set the switch (SW7) of RS232C conversion
adaptor to the "FLASH UCOM" position. (Fig. 1)
2. Connect the writing port (CB7 of HDMI P.C.B.)
located on the rear panel of this unit to the serial
port (RS232C) of the PC with RS232C cross
cable, RS232C conversion adaptor and flexible
flat cable as shown below. (Fig. 1)
PC
Serial port (RS232C)
RS232C cross cable
RS232C クロスケーブル
PC(RS232C)を使用したアップデート方法
● 必要なツール
・ プログラム書き込み用プログラム ....... FlashSta.exe
・ ファームウェア ..........................................yas72_xxx.mot
yas72_xxx.id
・ RS232C クロスケーブル D-sub 9pin メス
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
・ RS232C 変換アダプター(部品番号:WR492800)
● 準備と注意
・ 指定のダウンロード先から、ファームウェア書き
・ RS232C クロスケーブルは必ず上記仕様のものを
・ 書き込み時は、PC 上の他のアプリケーションソ
● 接続
※ 本機の電源コードを AC コンセントから抜いてく
1. RS232C 変換アダプターのスイッチ (SW7) FLASH
2. 本機の書き込み用ポート(HDMI P.C.B. の CB7) と
This unit /
本機
(HDMI P.C.B. CB7)
RS232C conversion adaptor
RS232C 変換アダプター
FLASH
OTHER
UCOM
SW7
Fig. 1
SR-300/NS-BR300/NS-P705/NS-B380
(仕様)
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
込み用プログラムと最新のファームウェアを、 PC
の同じフォルダにダウンロードしてください。
用意してください。
フトは閉じてください。
さらに、タスクトレイ上にあるソフトも閉じてお
くことを推奨します。
ださい。
UCOM 側に設定します。 (Fig. 1)
PC のシリアルポート(RS232C)を下記のように
接続します。 (Fig. 1)
Writing port
Flexible flat cable (9P)
カード電線 (9P)
yas72_xxx.id
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yht-s400Yht-s350Yht-s1400

Table of Contents