TP-Link TL-WR841N Quick Installation Manual

Quick Installation Guide

300Mbps Wireless N Router
TL-WR841N/TL-WR841ND
MODEL NO.
2
Connecting by Easy Setup Assistant
The Easy Setup Assistant is not supported in Linux or Mac OS. If you are runing without CD-ROM, Please refer to Appendix 1.
Insert the TP-LINK resource CD into the CD-ROM drive.
1
2 Here we take TL-WR841ND for example. Select
TL-WR841ND and click Easy Setup Assistant.
7106503740

Package Contents

TL-WR841N/TL-WR841ND Power Adapter
300Mbps Wireless N Router
MODEL NO. TL-WR841N/TL-WR841ND
Ethernet Cable Resource CD QIG
System Requirement
· Windows 7 · Windows Vista · Windows XP · Windows 2000
After con rming the hardware connection and the status
3
of LEDs, Click NEXT to continue.
4 After the connectivity is checked successfully, please click
NEXT.
1

Hardware Connection

Cable/DSL Modem
Internet
Connect the WAN port on your Router to the Modem's LAN port with an Ethernet cable.
1
Connect your computer to any Port labeled 1~4 on the Router with an Ethernet cable.
2
Plug the provided Power Adapter into the Power jack on the back of the Router and the other end to a standard electrical Wall socket.
3
Press the ON/OFF button to power on the Router.
Select the connection type your ISP provides and click NEXT.
5
Here we take PPPoE connection for example.
Enter the User Name and Password provided by you ISP
6
and click NEXT.
3
1 2
Create a unique or easy-to-remember name for your
7
wireless network. You can also keep the default setting.
Click NEXT to continue.
You are recommended to select Most Security
8
(WPA2-PSK) to secure your wireless network. Enter
a key of 8 ~ 63 characters and click NEXT.
(Turn over)