Totally Wicked Tornado EX2 User Manual page 5

USING YOUR TORNADO EX2 KIT
Switching On and Off
To switch the Tornado EX2 on, quickly
press the power button five times; the
indicator light will flash three times. Quickly
press the power button five times to switch
off; the indicator light will flash three times.
Changing Output Modes
The Tornado EX2 has 2 modes, constant
voltage or direct output. Constant voltage
produces less heat, power and vapour,
but delivers a consistent vape experience
whether the battery is fully charged or
8
nearly depleted. Direct output produces
more heat, power and vapour for a more
satisfying vape experience, but you may
notice power and vapour production
decrease as the battery charge depletes.
To switch between constant voltage and
direct output modes, switch the battery
off by pressing the power button 5 times,
then press and hold the power button;
the indicator light will illuminate white for
direct output mode or orange for constant
voltage mode. Switching the battery back
on activates the selected mode.
USING YOUR TORNADO EX2 KIT
Vaping Adjusting Airflow
Press and hold the power If you find air flow too airy or
button as you gently inhale too tight, rotate the airflow
the vapour, release the power adjuster to expose fewer or
button when you have finished more holes. Experiment to find
inhaling. The indicator light your preference.
will illuminate while the power
button is held down, and will
illuminate again after vaping
to show battery condition (see
page 10).
9