Ricoh GR Digital II User Manual page 82

• When the exposure value is in the
range of -2EV to +2EV, the brightness
of the picture display changes
according to the exposure value.
• When the exposure value exceeds
the range of -2EV to +2EV, the
indicator lights orange and the
brightness of the picture display does
not change.
1
2
Rotate the up-down dial to
change the aperture value.
3
Press the ADJ. lever to the left
or right to change the shutter
speed.
4
Half-press the shutter release
button.
5
Gently press the shutter release button all the way.
Note ----------------------------------------------------------------------------------------------
• To increase the exposure time, lower the shutter speed. In this case, camera shake
may occur. Hold the camera steady with two hands or use a tripod when shooting.
• While shooting with a slow shutter speed, the picture display turns off.
• When the ISO setting is set to [Auto] or [Auto-Hi] in manual exposure mode, the ISO
is fixed at ISO 100. (GP.126)
• When [Zoom Button] on the setup menu is set to [Expo. Cmp], the exposure
compensation setting screen is not displayed even if you press the 8/9 buttons in
manual exposure mode. When the 8/9 buttons are pressed, the value is
automatically set closer to the appropriate exposure (closer to the center of the
exposure value indicator). This is useful when, for example, you want to change/
adjust the exposure value from closer to the center of the exposure value indicator
(the appropriate exposure).
• The AE lock does not work in manual exposure mode even if the Fn (Function) button
is assigned to [AE Lock]. When the Fn button is pressed, the value is automatically set
closer to the appropriate exposure (closer to the center of the exposure value indicator).
This is useful when, for example, you want to change/adjust the exposure value from
closer to the center of the exposure value indicator (the appropriate exposure).
Caution------------------------------------------------------------------------------------------
When the shutter speed is set to 15 or more seconds, the function to remove noise from
images operates. Therefore, the time until image recording is complete is about twice the
set shutter speed.
80
+2EV
-2EV
M
F4.0 F4.0
1/80 1/80