Ricoh GR Digital II User Manual page 217

Problem
The image is too bright.
The image is too dark.
The image lacks natural
color.
The date or recording
information does not
appear on the screen.
The brightness of the
picture display changes
during AF.
There is a vertical smear
on the image.
The level indicator is not
displayed.
The image is tilted even
though it was shot with
the level indicator in the
middle or while the level
sensor sound was
sounding.
Cause
The light intensity of the flash is
not appropriate.
Subject is overexposed.
The brightness of the picture
display is not appropriate.
The shot was taken in a dark
place while set to flash off.
The subject is underexposed.
The brightness of the picture
display is not appropriate.
The picture was shot in conditions
that made it difficult for auto white
balance to adjust the white
balance.
Display is set to no symbol
display.
You are using AF in a dark place
or when the auto focus range and
surrounding brightness are
different.
This is a phenomenon that occurs
when a bright subject is shot. It is
called the smear phenomenon.
[Level Setting] is set to [Off] or
[Sound].
The display is set to a setting
other than normal symbol display
or histogram.
The camera is upside down
(shutter release button is on the
bottom).
You shot the image while moving,
such as on a amusement ride.
The subject is not level.
Solution
Adjust the light intensity of the
flash. Alternatively, move a little
away from the subject or
illuminate the subject with
another light source instead of
using the flash.
Correct the exposure.
Decrease the exposure time.
Adjust the brightness of the
picture display.
Open the flash.Use the F (Flash)
button to cancel flash off.
Correct the exposure.
Increase the exposure time.
Adjust the brightness of the
picture display.
Add a white object to the
composition or use a white
balance mode other than [AUTO].
Press the DISP. button to change
the display.
This is normal.
This is normal.
Set [Level Setting] to [Display] or
[Disp + Snd].
Press the DISP. button to change
the display to normal symbol
display or histogram.
Hold the camera correctly.
Shoot in an environment that is
not moving.
Check the subject.
Refer to
P.109
P.120
P.79
P.160
P.44
P.120
P.79
P.160
P.122
P.56
-
-
P.173
7
P.56
-
-
-
215