Ricoh GR Digital II User Manual page 215

Shooting
Problem
The camera does not
shoot even if you press
the shutter release
button.
Unable to view the shot
image.
Images do not appear on
the picture display.
Although the camera is
set to auto focus, it is
unable to focus.
Cause
Battery is exhausted.
The camera is not on or it is not in
the shooting mode.
The camera is in playback mode. Press the 6 button to select the
The shutter release button is not
pressed all the way.
The SD memory card is not
formatted.
The SD memory card is full.
The SD memory card has
reached the end of its useful life.
The flash is charging.
The SD memory card is locked.
The contact surface of the SD
memory card is dirty.
The image confirmation time is
too short.
The camera is not on or the
picture display is dark.
The picture display is off.
The VIDEO/AV cable is
connected.
The lens is dirty.
The subject is not in the center of
the shooting range.
It is a hard-to-focus subject.
You are too close to the subject.
Solution
Charge the rechargeable battery
or use the AC adapter. Replace
the alkaline batteries with new
batteries.
Press the POWER button to turn
the camera on or press the 6
(Playback) button to select the
shooting mode.
shooting mode.
Press the shutter release button
all the way.
Format the card.
Load a new card, or delete
unwanted files.
Load a new SD memory card.
Wait until the Auto Focus/Flash
lamp stops blinking.
Unlock the card.
Wipe with a soft, dry cloth.
Lengthen the image confirmation
time.
Turn the camera on or adjust the
brightness of the picture display.
Press the DISP. button to turn the
picture display on.
Disconnect the VIDEO/AV cable. P.147
Wipe clean with a soft, dry cloth. P.18
Shoot with focus lock.
Shoot with focus lock or manual
focus.
Shoot with macro mode or move
a little away from the subject.
Refer to
P.30
P.31
P.225
P.33
P.47
P.47
P.38
P.158
P.31
P.52
P.31
P.44
P.28
-
P.176
P.33
P.160
P.56
7
P.38
P.38
P.96
P.43
213