Copy Settings; Copying Onto Other Media - Ricoh A251 Operating Instructions Manual

COPYING ONTO OTHER MEDIA

To copy onto vellum (translucent or tracing paper) or film, select the Copy Media function to match
the paper type (see below).
Type of paper
Plain paper
Film
Vellum
Heavy paper
Thin paper
This list is not complete. If you are not sure of what type of paper you have, check the label on the
paper package.
1 Press the Copy Media key to turn on the "Vel-
lum" or "Film" indicator.
The "Wait" indicator goes on and either the
"Vellum" or "Film" indicator lights.
2 When the "Wait" indicator goes off and the
"Ready" indicator goes on, the copier enters
the ready condition.
Notes
Even if you have set the Copy Media function correctly, creasing might
occur depending on temperature or humidity. If this happens, adjust the
fusing temperature manually. See the next page.

3. COPY SETTINGS

Media setting
Both indicators off
Film indicator on
Vellum indicator on
Vellum indicator on
No indicator, or film, if
necessary.
Clear Modes/
Energy Set
Energy Saver
Saver Original
Set RF
Paper Select
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker Clear/Stop
Emergency Stop
Program
27