Combination Switch - SMART Fortwo cabriolet Operator's Manual

X
Activating: Switch off the ignition.
X
Switch on the high-beam flasher and
press button * on the key
simultaneously.
An acoustic signal sounds.
The daytime running lamp mode is
activated.
X
Turn the exterior lamp switch to position
$.
When the drive system is active, and you
turn the exterior lamp switch to position
T or L, the manual headlamp mode
has priority over the daytime running lamp
mode.
The corresponding exterior lamps come on
Y
( page 61).
X
Deactivating: Switch off the ignition
and remove the key from the starter
switch.
X
Switch on the high-beam flasher and
press button # on the key
simultaneously.
An acoustic signal sounds.
The daytime running lamp mode is
deactivated.
LED daytime running lamps* (USA only)
X
Switching on: Switch on the ignition.
The LED daytime running lamps are
switched on.
X
Switching off: Switch on the parking
lamps or the low‑beam headlamps.
The LED daytime running lamps are
switched off.
When the drive system is active, and you
turn the exterior lamp switch to position
T or L, the manual headlamp mode
has priority over the LED daytime running
lamp mode.
The corresponding exterior lamps come on
Y
( page 61).
* optional
LED daytime running lamps*
(Canada only)
X
Switching on: Switch on the ignition.
The LED daytime running lamps are
switched on.
X
Switching off: Switch on the low‑beam
headlamps.
The LED daytime running lamps are
switched off.
Combination switch (high beam, high
beam flasher and turn signals)
X
Make sure the key is in starter switch
position 1.
High‑beam headlamps and high-beam
flasher
X
Make sure the low‑beam headlamps are
Y
switched on ( page 62).
X
Switching on: Push the combination
switch to position 1.
The high‑beam headlamps come on.
The high‑beam headlamp indicator lamp
K in the instrument cluster comes on.
X
Switching off: Pull the combination
switch in direction of arrow ; to its
original position.
The high‑beam headlamps go out.
The high‑beam headlamp indicator lamp
K in the instrument cluster goes out.
X
High-beam flasher: Pull the combination
switch briefly in direction of arrow ;.
Lighting
63
Z