Champion Brute Platinum XLT Tapper Operator's Manual page 2

Power Input
Voltage
No Load min
Tapping Capacity
Dimensions
Net Weight
Locking screw Swivel joint
Universal tap chuck
Tap (not included)
Warning: This power tool is equipped with over load protection. If tool overheats,
switch off for at least 3 minutes to reduce temperature before switching on again.
2
4A / 450W
115V, 60Hz
Forward 280
Reverse 680
Steel 14mm (9/16")
Aluminum 16mm (5/8")
400mm x 80mm x 200mm
2.7 Kg (6 lbs) (Not including side handle 0.45 Kg (1 lb))
Lock Screw
(depth stop) Depth Stop
Safety Clutch
www.championcuttingtool.com
Gearbox
Motor
Side Handle
Trigger switch
Main handle