Cisco ASR 5000 Installation Manual page 10

Mid-Mount Installation of the Chassis
Step 3
Repeat step 1 and step 2 for any additional chassis you are installing in the equipment rack.
Step 4 Proceed to the Grounding the Chassis, on page 12
Mid-Mount Installation of the Chassis
Follow the instructions below to perform the mid-mount installation of the system.
Step 1 On the side of the chassis, unfasten the eight Phillips #2 screws that secure the mounting bracket to the chassis.
Step 2 Place the mounting bracket over the middle set of mounting holes on the side of the chassis and secure it to the chassis
with the screws you removed in step 1.
ASR 5000 Installation Guide
10
section and ground the chassis.
Chassis Installation