Download Print this page

TPI PM18-S Owner's Manual

Power mister

Advertisement

Quick Links

OPERATION – INSTALLATION– PARTS MANUAL
www.tpicorp.com
ELECTRICAL SHOCK
x Serious injury or death
possible.
x Disconnect from electrical
supply before filling,
servicing, or moving
product.
x
Read and understand all
safety information in this
manual before using
product.
SAVE THESE INSTRUCTIONS
Issue Date: 05-01-03
106711
Made in
U.S.A.
Power requirements..................................................................120V, 60 Hz, 2.2 Amps.
PSI Rating...................................................................................................130 psi
Generates 2,000 Cubic Ft. / Minute of Fan Propelled fine mist vapor, cooling
up to 200 sq.ft. (2-gallons/hr – full-on, without cycling)
Fan Motor...........................1-Speed, 120volt, 1/8 HP, sleeve bearing, permanently
lubricated, totally enclosed, permanent split capacitor.
Switch.......................................................................Toggle (Fan Only or Fan & Mist)
Blade......................................................................................................Aluminum
Power cord..............................................18' 18/3 SJT type, with molded plug GFCI Plug
Cooler Size..............................................................................................10 Gallons
Cooler & Fan Head Dimensions....................................................17" Wide X 20" Long
HAZARD.
POWER MISTER
MODEL:
PART NO.:

SPECIFICATIONS

IMPORTANT SAFETY INFORMATION
1. Check local codes and utility standards. The
installation must comply with their rules.
2. Never use during rain, sleet, hail, snow or any
other inclement weather conditions.
3. Your cooling unit will run on 120 volt AC, 60
Hz (cycle) only.
4. Do not operate if plug or cord is damaged in
any way.
5. Do not step on or roll over power cord with
heavy or sharp objects.
6. Do not operate unit unless all parts are
securely in place.
7. Remove the plug from the electrical
receptacle by pulling on the plug and not on
the cord.
8. Test the GFCI safety plug monthly to ensure
it is functioning properly.
9. Do not operate near open containers of
flammable liquids or gases.
10. Do not place foreign objects through guards
into blades.
11. Never wash your unit with garden hose;
water may harm motor and pump.
12. If the unit is damaged or it malfunctions, do
not continue to operate it. Call TPI customer
service department at 1-800-251-0382.
OIPM P/N 8914
PM18-S
08554702
Page 1 of 3

Advertisement

loading
Need help?

Need help?

Do you have a question about the PM18-S and is the answer not in the manual?

Questions and answers

Summary of Contents for TPI PM18-S

  • Page 1: Specifications

    11. Never wash your unit with garden hose; SAVE THESE INSTRUCTIONS water may harm motor and pump. 12. If the unit is damaged or it malfunctions, do not continue to operate it. Call TPI customer service department at 1-800-251-0382. Issue Date: 05-01-03 OIPM P/N 8914...
  • Page 2 SET-UP INSTRUCTIONS ELECTRICAL SHOCK 1. Remove unit from carton making sure HAZARD to locate water supply line and filter assembly. x Serious injury or death possible. 2. Attach water supply hose with filter assembly to the pump. x Disconnect from 3.
  • Page 3 TPI Corporation, however, reserves the right to refuse any return, at our discretion, if TPI Corporation is not responsible for error. All special, custom made or equipment with special finishes, and modified versions of cataloged numbers are not returnable.