Recording Gps Data (I) - di-GPS Eco ProFessional 2 User Manual

RECORDING GPS DATA (I)

Connect ECO PF-2 GPS to the camera and turn the camera on.
If ECO PF-2 GPS is properly connected, the LED of ECO PF-2 GPS will start
blinking and a GPS icon will be shown in the top control panel / on the LCD
monitor. The blinking LED means that the GPS receiver is searching for a signal.
The GPS icon will stop blinking once signal has been established and the
camera is ready to record the current position.
STATUS LED
(on GPS) (on camera)
Blinking Icon
Blinks
Blinks
Steady On
NOTE

LED on ECO PF-2 GPS only represents the status of ECO PF-2 GPS but not the reception of GPS data to the camera.

GPS data is only recorded when
Please make sure that the
DI-GPS® IS A REGISTERED TRADEMARK OR A TRADE MARK OF DAW N TECHNOL OGY LIMITED.
NIKON D5, D4, D4S, D3, D3S, D3X, D500,D810A, D810, D8 00, D800E, D700, D300, D 300S, D2XS, D2X, D2HS,
D200 D5600, D3400, D7200, D5500, D3300, DF, D5300, D610, D600, D75 0, D7100, D7000, D5100, D5000, D3200,
D3100, D90 ARE REGISTERED TRADE MARK OR A TRADEMARK OF NIKON CORPORATION IN THE UNITED
STATES AND/OR OTHER COUNTRIES.
FUJIFILM AND S5 PRO ARE REGISTERED TRADE MARK OR A TRADEMARK OF FUJIFILM U.S.A., INC. IN THE
UNITED STATES AND/OR OTHER COUNTRIES.
GPS ICON
 No fix, Signal searching
 No Last Position Memory output
 No GPS data will be recorded in the photos
 No fix, Signal searching
 Last Position Memory output with current UTC
date/time to the camera until new fix is available
Icon Steady
 Last fixed GPS position will be recorded to the photos
 Fix available
 ECO PF-2 GPS continuously sends the current GPS
position to the camera.
Icon Steady
GPS icon is shown in the top control panel / on the LCD monitor of DSLR camera.
GPS icon is displayed before shooting.
DESCRIPTION
V1.2
9