General Instructions - RHINO 1640 Operator's Manual

General Instructions

Never work under the Implement, the framework, or any lifted
component unless the Implement is securely supported or blocked up
to prevent sudden or inadvertent falling which could cause serious
injury or even death.
Never allow anyone to get under the loader or attachment or to reach
through the loader lift arms when raised. Serious injury could result from
crushing or pinching by the loader or attachment.
Do not modify or alter this Implement.
Implement, any of its components or any Implement function.
Never interfere with factory-set hydraulic calibrations.
cause a failure of the equipment and may result in injury.
The Assembly Manual instructs the owner/operator in the correct assembly of the Front End Loader using
standard and optional equipment. For proper assembly instructions refer to the Assembly Manual that is
accompanied with the Operator's Manual.
NOTE: Always keep your Assembly Manual with the Operator's Manual.
1640-1645 01/11
© 2011 Alamo Group Inc.
ASSEMBLY
(SG-14)
Do not permit anyone to modify or alter this
Assembly Section 3-5
(SL-06)
(SG-8)
Any change in calibration could
(SBH-13)