Table of Contents
Advertisement
Identify your ES1AWB by its MAC address (printed on a label on
the ES1AWB).
If you need to change the IP address of the ES1AWB, you can
accomplish this using the Discovery software, or you can open the
Web Configuration and Management Interface and do it there. (See
Configuring Network Settings later in the next chapter.)
1. To change the IP address of the ES1AWB from the discovery
software, click Configure IP Settings.
2. In the dialog that appears, select Manually configure network
settings.
3. Type the new IP Address, Subnet Mask, Default Gateway and
system password (initially dbps) in the appropriate boxes, then click
Apply.
4. Click Reboot Device. This may take a minute or more to complete.
5. Click Refresh List to confirm the new IP address has been
accepted.
Manual Documentation Number: ES1AWB-2907m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Chapter 4
Configuring the IP Address
pn6908-rev003
13
Advertisement
Table of Contents
