Advertisement
7
S E T R E M O T E V I E W I N G P O R T S ( c o n t i n u e d )
•
SERVER PORT is responsible for the mobile app and client
software log-in
•
responsible
HTTP PORT is
for Web browser log-in
•
RTSP PORT is
responsible
for video/audio streaming
NOTE: The HTTP port, server port, and RTSP port can
be changed to avoid conflicts with the ISP or if
multiple devices are installed at a single location.
8
S E T U P P O R T F O R W A R D I N G
Port forwarding redirects communication from one address/port number to another to make services on a
protected network available to hosts on an external network.
1.
Log into the router, and proceed with port forwarding. Port forwarding steps differ by router. For
port forwarding assistance, contact your Internet Service Provider (ISP) or router manufacturer.
Also refer to www.portforward.com for step-by-step instructions.
Hikvision USA is not associated with www.portforward.com and is not
NOTE:
responsible for any activity between the user and www.portforward.com. Avoid
accidentally downloading any software from www.portforward.com.
2.
Proceed to the Routers section on the Website for step-by-step instructions.
9
S E T U P H I K - C O N N E C T P 2 P C L O U D S E R V I C E
NOTE:
Ports 9010 and 9020 must not be blocked for the Hik-Connect Cloud service to work.
Use the Hik-Connect mobile app (from iOS App Store or Google Play) to create a
Hik-Connect P2P Cloud account to connect Hikvision devices over the Internet. See the
User Manual
.
1.
Enable Hik-Connect P2P on the NVR.
1)
Go to Main Menu > System Configuration > Network > Platform Access.
2)
Check the Enable checkbox.
3)
Server Address must be "dev.us.hik-connect.com." If not, check the Custom checkbox, and
type "dev.us.hik-connect.com."
4)
Click Apply. Status will change to "Online" (if all settings are correct).
5)
Note the Serial Number and Verification Code shown here (for use when registering the DVR in
your Hik-Connect account) or use the QR code displayed.
2.
To see a device's video stream on the Hik-Connect or iVMS-4500 mobile app, add the device.
1 3
S E T U P R E C O R D I N G ( c o n t i n u e d )
. CAMERA (Select)
.
3 ENABLE MOTION DETECTION
3
Click to enable/disable
/
1
$ MOTION GRID (Draw motion area)
/ SENSITIVITY
Set green squares for sensitivity
$
1 SETTINGS/SET
Arming schedule & linkage actions
4 APPLY
4
T Record Quality
•
Main Stream
1.
Go to RECORDING CONFIGURATION > RECORD QUALITY > MAIN STREAM.
- Stream Type enables/disables audio streaming from the cameras (if the camera does
not have audio capabilities, Stream Type will have only Video option).
- Resolution sets recording resolution.
- Bitrate Type:
> Variable saves HDD space
> Constant provides more stable stream
. RECORD (MAIN STREAM)
Select tab
.
3 CAMERA
3
Select IP camera
/
$
$ EVENT
For event recording only (motion
or alarm)
1
/ CONTINUOUS
For live view image and
continuous recording
1 VIDEO QUALITY
Select number of green squares
4
to set quality (in example,
sensitivity is set to 5)
4 VIDEO ENCODING
Select compression scheme
- Video Quality adjusts clarity (high = four green squares is default). Use highest if HDD
allows. Medium setting is balance between good image and saving HDD space.
- Frame Rate sets recording frame rate (8 fps on continuous and 15 fps on motion by
default). Higher rates require more storage, but allow better slow motion playback.
- Max Bitrate Mode chooses between pre-set and custom values (General is default).
- Max Bitrate (kbps) is chosen bitrate for streaming video. Adjust Max Bitrate to meet or
exceed the rate recommended by the system for the chosen parameters.
- Max Bitrate Recommended is impacted by resolution, quality, and frame rate.
- Record Audio turns on audio recording. Requires external mic or camera built-in mic.
- Video Stream determines which stream is recorded. Leave at default (Main Stream).
9
S E T U P H I K - C O N N E C T P 2 P C L O U D S E R V I C E ( c o n t i n u e d )
1)
Login to Hik-Connect mobile app with your user name, e-mail, or mobile number and password.
2)
On the Home screen, click "+" (upper right corner).
3)
Enter the device's information.
x If you have device's QR Code: Use the QR Code Scanner to scan the device's QR Code.
x If you do not have device's QR Code: Enter the device information manually:
a. Click Edit (pencil) on top right corner.
b. Enter device serial number (device must be online), then click OK.
c. When the device appears on the "Results" screen, click Add.
d. Enter device's 6-character Verification Code (all upper case), then click OK.
e. Click Finish.
10
A D D I P C A M E R A S
1.
Right click a window in Live View mode to display the menu.
2.
Online cameras in the same network segment will be detected and displayed in the camera list.
3.
Select camera and click
to add it (using DVR's admin password), or click One-touch Adding to
add first two cameras in list of three or more (w/same admin password).
NOTE:
Make sure the camera to add has been activated by setting the admin
password and the camera's admin password is the same as the DVR's.
Figure 5, IP Camera Management Interface
1 3
S E T U P R E C O R D I N G ( c o n t i n u e d )
•
Substream
1.
Go to RECORDING CONFIGURATION > RECORD QUALITY > SUBSTREAM to set up
the Sub Stream to stream to mobile devices and display multiple cameras locally.
NOTE:
If speed is insufficient, lower frame rate, bitrate, and/or resolution.
.
. SUBSTREAM TAB (Select)
3
$
3 CAMERA (Select Camera)
/
$ STREAM TYPE (Select Choice)
1
/ RESOLUTION (Up to 4CIF)
1 VIDEO QUALITY
# of green squares sets quality
(in example, sensitivity is 3)
•
More Setting...
1.
Click More Setting... to display additional settings.
. PRE-RECORD
.
Secs to record before recording
3
3 POST RECORD
3 $
Secs to record after recording
/
$ EXPIRED TIME (DAY)
1
Days to keep the recording
4
/ REDUNDANT RECORD
Record to redundant drive
1 RECORD AUDIO
Check to record audio
4 VIDEO STREAM
Which video stream to record
14
P L A Y B A C K R E C O R D E D V I D E O
1.
Go to MENU > PLAYBACK and select the desired camera(s) from the menu on the right.
2.
Select date (days w/recordings will be blue if continuous only or yellow if day has event recording).
3.
Press PLAY (click within the timeline to jump to desired time).
3
. PLAYBACK TYPE MENU
Select type of record to play
.
3 FULL SCREEN
Full screen multi-channel playback
$ PLAY/STOP
/ CAMERA LIST
Select camera(s) to play back
/
1 CALENDAR
Select date to play back
4 TIMELINE
Click on timeline to jump to
desired playback time
1
$
4
1 0
A D D I P C A M E R A S ( c o n t i n u e d )
IP Camera Management Icons
Icon
Explanation
Icon
Explanation
Edit basic camera parameters
Upgrade the connected camera
Camera disconnected; click icon to get
Delete the IP camera
camera's exception information
Play connected camera's live video
Camera connected
. DVR CAMERA CHANNELS
Cameras connected to DVR
3 PLAY
Play camera's live video
.
3
$
/
$ EDIT (Pencil)
Change IP address (in LAN range)
/ CAMERA LIST (White)
Added cameras
1
1 LAN CAMERAS LIST (Yellow)
Detected cameras will appear here
NOTE: To change camera
name, go to OSD.
11
A D D A N A L O G C A M E R A S
1.
Connect analog camera(s) to the "Video In" BNC connectors. Analog cameras are enabled by default;
no further action is required.
12
V I E W L I V E V I D E O
Live View displays real-time video.
Icons in the upper right of screen show each
camera's record and alarm status.
• Alarm (video loss, tampering, motion detection,
sensor alarm, or VCA alarm)
• Record (manual record, continuous record, motion
detection, alarm, or VCA triggered record)
• Event/Exception (event and exception information
appears at lower-left corner of screen)
1 4
P L A Y B A C K R E C O R D E D V I D E O ( c o n t i n u e d )
Playback Controls
T Play Back Record Files
1.
Go to MENU > LIVE VIEW.
2.
Left click a Live View window to bring up a shortcut toolbar and click
T Playback Controls
1.
Right click a Live Image to display a Quick menu and click
for instant playback.
15
B A C K U P V I D E O R E C O R D I N G S A N D C L I P S
Back up recorded video clips to ensure important video is not lost or destroyed.
T Choose Recorded Video Clips to Back Up
1. Connect a USB flash drive, HDD, or DVD writer to an available USB port (this step is mandatory).
2. Go to MENU > PLAYBACK.
3. Select cameras for playback.
4. Select the date and beginning time of the incident.
5. Click START CLIPPING
.
6. Select the ending time of the incident.
7. Click END CLIPPING
(same button as START CLIPPING). Clip will be marked.
8. Repeat steps 1-6 as many times as required.
9. Click FILE MANAGEMENT
to display a new window containing all marked clips.
10. Select the desired clips.
11. Click EXPORT to save files to the inserted USB device.
T Lock Video Clips
1. Click on the images of the clips you want to lock.
2. Press LOCK
to prevent the file from being erased.
T Back Up Video Clips
1. Connect a USB flash drive, HDD, or DVD writer to an available USB port.
2. Click File Management to display the File Management window.
3. In the File Management window, choose video clip(s) to back up and click Export.
4. Choose backup device (USB flash drive, USB HDD, or DVD writer).
5. Click Export (to check backup, choose recorded file in Export interface and click
13
S E T U P R E C O R D I N G
The system defaults to record video continuously at 8 fps, or at 15 fps when motion is detected.
T Recording Schedule
Default is to record continuously every day. Do the following to change the recording schedule:
1. Go to MENU > RECORDING CONFIGURATION > SCHEDULE.
2. Choose CONTINUOUS or EVENT/(MOTION DETECTION) under the Type pull-down menu.
3. Use cursor to select (days will turn blue [continuous] or yellow [event/motion detect]) or deselect
(days will turn gray [off]) the calendar days you wish to record.
4. Apply time settings as desired.
5. Press APPLY.
1
$
.
3
T Motion Detection Areas
To define the image areas that Motion Detection will monitor for each camera, do the following:
1.
Go to MENU > RECORDING CONFIGURATION > MOTION DETECT.
2.
Use Camera pull-down menu to select camera to configure.
3.
Check the Enable Motion Detection checkbox to enable motion detection.
4.
Use the Sensitivity boxes to select how responsive the detection should be (the more green
boxes lit, the greater the sensitivity).
5.
Drag a grid(s) over the area(s) on the image that will be sensitive to motion.
6.
Click Settings Set to configure Arming Schedule (when detection is enabled) and Linkage
Actions (what action(s) to take when motion is detected).
1 5
B A C K U P V I D E O R E C O R D I N G S A N D C L I P S ( c o n t i n u e d )
for instant playback.
3
4
/1
$
.
3
Hikvision USA Inc., 18639 Railroad St., City of Industry, CA 91748, USA
Hikvision Canada, 4848 rue Levy, Saint Laurent, Quebec, Canada, H4R 2P1
Telephone: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690
).
QSG DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 031418NA
. TYPE
Motion or Continuous (default)
3 COLOR
Shows Recording Schedule days:
• Blue=Continuous
/
• Yellow=Event (motion/alarm)
• Grey=None
$ TIMES
Customize schedule times (ignore for
"motion only" recording)
/ ADD
Press to add time settings to
schedule
1 ENABLE SCHEDULE
Camera will not record unless
checked
. CAMERA LIST
Select cameras to view
3 CALENDAR
Select dates to view
.
$ PLAY/STOP
Toggles between Play and Stop
/ START/STOP CLIPPING
Toggles between Start Clipping
and Stop Clipping
1 LOCK
Locks selected video clips to
prevent them from being deleted
4 FILE MANAGEMENT
Displays list of saved clips, export
clips from this window
. CAMERA LIST
Select desired cameras to export
3 SEARCH CRITERIA
Enter what to search for.
$ SEARCH
Find video clips based on Search
Criteria.
$
E-Mail: sales.usa@hikvision.com • www.hikvision.com
© 2017 Hikvision USA Inc. • All Rights Reserved
Specifications subject to change without notice.
Advertisement
