Easy Setup menu item
You can scan for unused frequencies using the Easy Setup menu item.
Switch off all transmitters before you perform the scan. If transmit-
ters are still switched on, they are detected as unavailable frequen-
cies and the frequencies that are actually available cannot then be
used.
To open the Easy Setup menu item:
On the home screen, press the SET button to open the operating menu.
▷
▷
Press the UP or DOWN button until the Easy Setup menu item appears
in the selection frame.
▷
Press the SET button to open the menu item.
Adjust the settings as desired.
▷
•
Scan New
List: Automatically searches for unused receiving frequen-
cies (frequency preset scan):
►
•
Current
List: Selects an unused frequency preset:
►
•
Reset
List: Releases all occupied frequency presets and selects an
unused frequency preset:
►
Press the SET button to save the changes you made to the settings.
▷
or
Press the ON/OFF button to cancel the entry without saving the set-
▷
tings.
Using the EK 500 G4
54