Synchronizing Devices - Sennheiser EK 500 G4 Instruction Manual

Synchronizing devices

You can synchronize ew 500 P G4 series transmitters and receivers via the
receiver's infrared interface.
You can adjust the Parameters to be transferred to the transmitter here:
"Advanced -> Sync Settings menu item"
To synchronize the devices:
▷ Switch the transmitter and the receiver on.
Call up the Sync menu item on the receiver.
▷
Sync appears in the receiver's display.
Hold the infra-red interface of the transmitter in front of the infra-red
▷
interface of the receiver.
The parameters are transferred to the transmitter. When the transfer is
complete, a tick appears in the receiver's display as a confirmation.
Then the receiver will return to the current standard display.
►
To cancel synchronization:
▷ Press the ON/OFF button on the receiver.
An X appears in the display.
This icon also appears when:
• no transmitter is found or the transmitter is not compatible.
• no transmitter is found and the synchronization process automatically
ends after 30 seconds.
Synchronizing devices
111