Connecting Headphones To The Ek 500 G4 - Sennheiser EK 500 G4 Instruction Manual

Connecting headphones to the EK 500 G4

ATTENTION
Danger due to high volume levels
Volume levels that are too high may damage your hearing.
Turn down the volume of the headphone output before you put on the
▷
headphone.
To connect the headphones to the receiver:
Insert the cable's 3.5 mm jack plug into the PHONES socket on the re-
▷
ceiver as shown in the diagram.
▷ Screw the plug's coupling ring onto the audio socket thread of the re-
ceiver if needed.
Installing the EK 500 G4
21