Advertisement
Do not locate the antenna near overhead power lines or other electric light or power circuits, or where it can come into contact
with such circuits. During installation, exercise extreme care not to come into contact with these circuits, which can cause serious
injury or death. For proper installation of the product, refer to national and local electrical codes: NFPA (National Fire Protection
Association) 70, National Electrical Code Article 810 (U.S.); Canadian Electrical Code, Part I, CSA 22.1 and Section 54 (Canada);
and if local or national electrical codes are not available, refer to IEC (International Electrotechnical Commission) 364, Part 1
through 7 (other countries).
Do not connect or disconnect antennas or cables from the AP during periods of lightning activity.
2
AP1130 and AP170 5-GHz Directional Antenna Installation Guide
Advertisement
