FLIR CM-6206-H1-I Quick Install Manual

A. Connect the Camera
1. Attach the Audio cables to an external device.
2. If not using poE, attach the power wires to an
optional 12VDC power supply.
3. Attach the four Alarm wires to an external device.
4. Attach the Ground lug to a ground source.
5. Attach the RJ45 connector to the network switch
for a 10/100/1000 Mbps Ethernet connection and
PoE connection. Verify that there are a solid
green LED and flashing yellow LED on the
camera's RJ45 connector.
B. Discover the Camera
The camera's web interface can be accessed by
Internet Explorer 9 and higher (32-bit) on PCs running
Windows 7, 8, or 8.1 with the ActiveX plug-in.
B.1. Set the Camera's IP Address
1. Install the CD in the product package or download
FLIR's Discovery Network Assistant (DNA) utility from
the Support > FLIR Firmware & Software
Downloads page at http://www.flir.com/security.
2. Click the DNA icon and run DNA version 2.0.4.4
or higher to log into the unit.
3. Attach the unit to the same LAN segment as the
computer that is managing the unit. DNA
automatically discovers the unit on the network.
4. Select the unit from the Discover List.
5. Select PAL or NTSC by selecting the unit and clicking
Change Video Format from the context menu, or
from the Properties > Device Properties screen.
6. Click Update .
Quick Install Guide
B.2.a Managing the camera with Horizon, Meridian or
on a DHCP-enabled network
If the camera is managed by Horizon configured as a DHCP
server, or is on a network with a DHCP server, the camera
automatically receives an IP address
.
1. Open DNA. The unit is automatically discovered on the
network. See section B.1 for instructions how to install DNA.
2. Verify that the unit is displayed in the Discover List. The unit
status should be displayed as Online and Authenticated.
B.2.b Managing the camera with Latitude or on a
network with static IP configuration
If the camera is managed by Latitude or is on a network
without a DHCP server, manually enter its IP address in DNA.
1. Open DNA. The unit is automatically discovered on the
network. See section B.1 for instructions how to install DNA.
2. If you use non-default credentials, the unit might become
unauthenticated. In this case, authenticate the unit:
a. Use DNA to select the unit(s).
b. Right-click or click the Login button.
c. Enter the camera's User Name ("admin") and Password
("admin").
d. Click Login.
Quasar Gen II
CM-6206-H1-I
6MP Mini-Hemispheric IP Camera
3. In the DNA Assign IP screen, uncheck Use DHCP, and enter the
unit's IP, Mask and Gateway IP addresses. If the camera is not
authenticated, you must first authenticate it.
4. Click Update.
B.3. Log into the Unit
1. Click the unit in the Discover List. The Login window opens.
2. Enter the camera's default User Name ("Admin") and Password
("1234"), which are case-sensitive. Then click OK.
3. Click Login in DNA. The unit's web interface opens.
4. If the User Account Control dialog box opens, click Yes to install
the ActiveX control file (install.cab). See section C.
5. If the ActiveX installation is not successful, in the IE Tools >
Internet Options > Advanced Security settings section, select
the "Allow software to run or install even if the signature is
invalid" checkbox.
6. Uncheck the checkbox after installing ActiveX. Then click OK.