Casio SE-S10 Quick Programming Manual page 2

Australian Quick Programming Guide
Casio SE-S10 (please refer to the supplied "User Manual" for further information)
8 Setting prices to Departments
The SE-S10 contains 20 departments, 5 are located on the keyboard and
an additional 15 are accessible using the department shift function.
Prices can be set to departments if required or entered manually from
within the sale.
A) Turn Key to PGM mode
B) Press
C) Press Dept Shift if programming shift departments
otherwise skip to step D
D) Key price then press department key
E) Press
Note: Press dept shift once to access departments 6~10 or twice
for 11~15 etc.
IMPORTANT: Never use decimal point key when imputing
price.
Setting Descriptors to Departments
10
The following procedure will program the descriptor "DAIRY" to Department number 1.
A) Turn Key to PGM mode
B) Press
C) Press
D) Enter
E) Press
Note: button is used to add a space or to lock a character if more than one character is used from a single key in
succession. An example of how this button is used is shown in section 13 - "Receipt Text Programming".
9
Setting prices to PLU's
The SE-S10 does have the option of 500 PLU's. A PLU lookup function is
provided should you decide to use PLU's on this register.
A) Turn Key to PGM mode
B) Press
C) Press
D) Enter
E) Press
This procedure sets $1.00 to PLU1.
11
Setting descriptors to PLU's
The following sequence will program the descriptor "DAIRY" to PLU
number 1.
A)
Turn Key to PGM mode
B)
Press
C)
Press
D) Enter
E)
Press
13
Programming Receipt Message
You can program receipt message text at
the top of the receipt. Up to 5 lines of text
can be programmed.
Receipt message sample
ó Receipt message 1st line
YOUR RECEIPT ó Receipt message 2nd line
ó Receipt message 3rd line
THANK YOU
CALL AGAIN ó Receipt message 4th line
ó Receipt message 5th line
12 Linking PLU's to Departments
Linking PLU's to departments is only required if you are using PLU's.
This process aids end of day reporting by grouping products (PLU's)
.
with departments
A) Turn Key to PGM mode
B) Press
Links PLU1 to
Department 4
C) Enter
D) Press