Table of Contents
Advertisement
Power Button
The Power button deactivates the selected plug‑in and reduces UAD resource
loads. When a plug‑in is deactivated with this button, the button is red and
POWERED OFF appears in the
Status Bar
under the plug‑in interface.
The Power button is located between the Tabs and the ZOOM slider in Channel
View when the PLUG‑IN Tab is active. To disable the currently selected plug‑in,
click the green Power button. To re‑enable the plug‑in click, the Power button
again.
Zoom Slider
The ZOOM slider increases the size of the currently selected plug‑in interface. Zooming
enlarges all controls in the interface for enhanced visual feedback and controls
manipulation.
The Zoom setting is unique for each individual UAD plug‑in. The zoom setting for each
plug‑in is global; the setting is used throughout Channel View wherever the interface
appears.
Note: Zoom is unavailable in Channel Strip view.
Zoom slider
UAD‑2 Live Rack Manual
89
Chapter 4: Live Rack Application
Advertisement
Table of Contents
