Smartwares DIC-222 Series Instruction Manual
  1. Manuals
  2. Brands
  3. Smartwares Manuals
  4. Intercom System
  5. DIC-222 Series
  6. Instruction manual
Smartwares DIC-222 Series Instruction Manual

Smartwares DIC-222 Series Instruction Manual

Hide thumbs Also See for DIC-222 Series:
1
2
3
4
5
6
7

Advertisement

Table of Contents

DIC-222 Intercom Series
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIC-222 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Smartwares DIC-222 Series

Summary of Contents for Smartwares DIC-222 Series

  • Page 1 DIC-222 Intercom Series Instruction Manual...
  • Page 2 WARNING PRODUCT OVERVIEW 1. Please read these instructions carefully before installing and using the product. INDOOR MONITOR 2. Do not cut the power supply cable to extend it; the device (transformer) will not work with a longer cable. Do not plug in the device until all the wiring has been finished. Screen INSTALLATION SAFETY Menu button/ Exit button...

  • Page 3: Installation

    INSTALLATION INSTALLATION When installing the outdoor unit, make sure that the location you wish to install it is dry. It is important that the camera or the electronics do not get wet. Mark the installation location 1. Drill holes in the wall, insert the wall plugs in the holes. Place the bracket and tighten the screws.
  • Page 4 INSTALLATION INSTALLATION The green terminals into the 1.2 The orange terminal into the DC 15V IN Take out the green terminal from accessories bag, connect the wires to the outdoor unit Plug in the power and check the wiring is correct Take out the orange terminal from accessories bag, connect the wires to the power...
  • Page 5 INSTALLATION INSTALLATION HOW TO CONNECT AN EXTRA MONITOR Take out the blue terminal from accessories bag, connect the wires to extension unit The blue terminal into the 3.4 Power Lock Lock Power Indoor Monitor Extension Additional Power Indoor Monitors Distance between units Wiring 1 - 50m 1 - 100m...

  • Page 6: Icon Summary

    MAIN MENU • Press the menu button to enter the main menu. Intercom function: When in standby, when a visitor presses the call button on the outdoor • Navigate the menu by using the left and right button. Confirm your selection with the OK button. Go unit, the indoor-monitor will chime and you will see a live view of the visitor on the screen.

  • Page 7: Technical Specification

    TECHNICAL SPECIFICATION INDOOR MONITOR Supply Voltage 15V 1A Screen size 7” (diagonal) inch Color configuration R.G.B.delta Video System PAL/NTSC Effective Pixels 800x3(RGB)x480 Consumption current 500 ± 200mA Operation temperature -10˚C - +50˚C Operation Humidity 85%(Max) Picture Type JPEG Video Type OUTDOOR UNIT Imaging sensor type 1/4”...

Table of Contents