Print The Image In Dot Printer; Print The Color Image In Thermal Printer - BIXOLON STP-131 Software Manual

4-7-2 Print the image in dot printer

* In the printer selection section of paragraph 4.2, when selecting between the SRP-275
and SRP-500, the Dot Printer image download mode is entered.
* The Dot Printer image download command uses the macro command "ESC g".
For further details, please refer to the commands manual of the corresponding model.
All stored images are printed.

4-7-3 Print the color image in thermal printer

* In the printer selection section of paragraph 4.2, when selecting between the SRP-
350plus, SRP-350plusF, SRP-352plus, SRP-370, SRP-372, the color image download
mode is entered.
* The Color image download command uses the macro command "GS ( L".
For further details, please refer to the commands manual of the corresponding model.
After selecting the address of the image to print following the recall of the addresses of
all currently stored images, press the "Print" button to print.
Rev. 2.03
- 11 -
NV Image Too
l