Table of Contents
Advertisement
Control Interface
2
3
4
5
1. Connection Status:
Show the connect information and status. If users use RS-232 serial Mode to connect device,
the graph is
change the control method, users can click on the
2. Output Settings
In this section, users can set up the coordinate for inputs, the source of window A~D, output
resolution, PAP layout setting and input rotation.
(1) Source Selection
For each display window, you can assign arbitrary video source here.
. In contrast, the graph of Ethernet is
6
7
1
. In addition, if users would like to
button to change.
8
7
Advertisement
Table of Contents
