Control Of The Heat Pump (New Color Led ); Controller Illustration - Midas Mida.Black 8 Installation Instructions Manual

2.Control of the heat pump (New color LED )

2.1 Controller illustration:

When heat pump is supplied with power, controller will display with full screen, shows that it is already
connected. If connection fails in 10 seconds, please check connections between communication cable
and control display, or replace with another control display.
Button functions:
button: ON/OFF switch to start or stop heat pump.
button:Timer button to set timer on and timer off.
MENU button: To enter parameter settings and confirm settings.
MODE button: To switch between heating, cooling and auto mode.
button: To increase or decrease value.
Icons definitions:
--heating icon, showing heat pump is in heating mode.
--cooling icon, showing heat pump is in cooling mode.
--auto icon, showing heat pump is in auto mode.
--compressor icon, showing compressor status.
--water pump icon, showing water pump status.
--fan icon, showing fan status.
--defrost icon, showing defrost status.
--four way valve icon, showing four way valve status.
--electric heater icon, showing electric heater status(only when external electric heater is connected)
--alarm icon, showing system alarm.
--fan speed icon, showing high (3), medium(2) and low(1) fan speed.
--key pad lock icon, showing buttons on the control display are locked.
Note: 1. Heat pump is not equipped with electric heater internally, only provides terminal for external
connection.
2. Fan speed is automatically controlled by ambient temperature, not manually.
MENU
MODE
Figure 2-1
9