GRAND VIDEOKE TKR-373MP Quick Manual

HOW TO INSTALL
MAIN UNIT – HDTV CONNECTION
1. Please connect the main unit to the HDTV using an HD Output cable as shown in
the image below.
Quick Guide
TKR-373MP
2. If a speaker system is available:
Please connect the audio output of the main unit to the audio input of the
speaker system as shown in the image below.
HOW TO INSTALL / 2-4
CHANNEL SETTINGS / 5-6
BASIC FUNCTIONS / 6-7
SECONDARY FUNCTIONS / 7-8
HOW TO USE GV SMART APP / 8-9
HOW TO INSTALL
02
MAIN UNIT – STANDARD TV CONNECTION
1. Please connect the main unit to the TV using an RCA cable as shown in the
image below.
TKR-373MP
POWER DC IN 12V
AUDIO/VIDEO
OUT
HDMI Wi-Fi
HD TV
HD INPUT
2. If a speaker system is available:
Please connect the audio output of the main unit to the audio input of the
speaker system as shown in the image below.
TKR-373MP
POWER DC IN 12V
AUDIO/VIDEO
OUT HDMI Wi-Fi
HD TV
HD INPUT
R-AUDIO-L
AUDIO
HOW TO INSTALL
03
POWER ON/OFF
1. Plug the power cable into the outlet.
POWER DC IN 12V
HDMI Wi-Fi
2. Switch on the main unit.
3. Check if the POWER LED (BLUE)
on the main unit is on.
POWER DC IN 12V
HDMI Wi-Fi
TV SET-UP
1. The default TV system is NTSC.
2. If you are using a PAL TV, please follow the instructions below.
[MENU] → "Config"
WIRELESS MICROPHONE CONNECTION
1. The wireless microphones are set in the default channel.
2. The wireless microphones can be turned on and used immediately after
turning on the main unit.
3. The wireless microphones will automatically turn off when not in use for 10 minutes.
4. When you are experiencing noise due to interference, please change the
channel of the microphone (see Channel Setting).
CHANNEL SETTINGS
04
TKR-373MP has sixteen(16) avaitable channels. (MIC1 Ch 1~Ch 8, MIC2 Ch 1~Ch 8)
Please take note that microphones and main player should be on the same channel.
In case of channel interference (either one or two of the microphones cannot be detected
by the main player), please follow the step by step instructions below for re-channeling.
POWER DC IN 12V [STEP 1] Change the channel on the main unit by using the remote control.
AUDIO/VIDEO
OUT
HDMI Wi-Fi
1. Turn on the main unit. Make sure no song is playing.
2. Go to channel select menu:
Press button + choose "Config"
+ button.
POWER DC IN 12V
AUDIO/VIDEO
OUT HDMI Wi-Fi
3. Select one channel number from 1 to 8
and press that specific number on the
remote.
4. Press button.
POWER
5. Press [Power off]
MIC 1
MIC 2
POWER
[STEP 2] Set the channel of the two microphones using the microphone's
keypad.
For the first(1st) microphone:
1) Turn on the microphone by pressing the
2) Press →
→ "TV Setup" → Select "PAL".
The microphone LED will be turned on and off twice.
3) Press the same channel number that you set in the main player.
The microphone LED will be turned on and off twice.
4) Press button.
Microphone LED will be turned on and off twice.
5) Press button to save.
Microphone LED will be turned on and off 6 times.
05
→ "System" → "MIC Channel Setup"
→ [Power on] to save.
button.
→ → button in order.
→
→