Installation of Barn Door on the LHX Series Track Light
1
Begin with fixture disconnected
from the track.
3
Tighten down the screw on
the outside of the accessory,
cinching the flexible silver metal
ring tight around the fixture.
www.currentbyge.com, www.gelighting.com
All trademarks are the property of their respective owners. Information provided is subject to
change without notice. All values are design or typical values when measured under laboratory
conditions. Current, powered by GE is a business of the General Electric Company.
© 2017
IND431 (Rev 07/10/17)
Metal ring
2
Slide the barn door accessory over the top of the fixture, ensuring
that the flexible silver metal ring on the inside of the accessory sits
completely around the outside of the fixture.
4
Once screw is tightened, check
that the accessory is securely
attached.
2