Baldor BC140 Installation And Operation Manual page 45

Table 10-2 provides information on symptoms, possible causes, and the suggested corrective action for
controls with optional forward-brake-reverse switch installed.
Table 10-2 Troubleshooting Guide for Controls with Optional Forward-Brake-Reverse Switch Installed
Symptom
Motor will not run in
Forward or Reverse
direction.
No braking action in brake
mode.
Possible Cause
Faulty wiring or loose connections
to the reversing switch.
Forward-Brake-Reverse defective.
Switch is defective.
Faulty connections or loose
connections.
Defective Brake Resistor.
Suggested Corrective Action
Correct the connections. See
Figure 12-1.
Replace Forward-Brake-Reverse
Switch assembly.
Check and correct connections.
Replace Forward-Brake-Reverse
Switch assembly.
45