Baldor BC140 Installation And Operation Manual page 4

WARNING! This product should be installed and serviced by a qualified technician,
electrician or electrical maintenance person familiar with its operation and the
hazards involved. Proper installation, which includes wiring, mounting in
proper enclosure, fusing or other overcurrent protection and grounding, can
reduce the chance of electric shocks, fires or explosion in the product or
products used with this product, such as electric motors, switches, coils,
solenoids or relays. Eye protection must be worn and insulated adjustment
tools must be used when working with control under power. This product is
constructed of materials (plastics, metals, carbon, silicon, etc.) which may be
a potential hazard. Proper shielding, grounding and filtering of this product
can reduce the emission of radio frequency interference (RFI) which may
adversely affect sensitive electronic equipment. If information is required on
this product, contact our factory. It is the responsibility of the equipment
manufacturer and individual installer to supply this safety warning to the
ultimate user of this product. (SW effective 11/92).
This control contains electronic Start/Stop and enable circuits that can be
used to start and stop the control. However, these circuits are never to be
used as safety disconnects since they are not fail-safe. Use only the AC line
for this purpose.
The input circuits of this control (potentiometer, start/stop, enable) are not
isolated from AC line.
Be sure to follow all instructions carefully. Fire and/or electrocution can
result due to improper use of this product.
4